rig-power connectors (1000v ac/dc) ampacity ampacity (using (using wire connector 535 mcm) 777 mcm) range style insert gender part number* plug w/ mech. clamp dead front pin (line side) rig -10p -m- plug w/ mech. clamp socket contact (load side) rig -10s -m- cable receptacle w/ mech. clamp dead front pin (line side) rig -15p -m- cable receptacle w/ mech. clamp socket contact (load side) rig -15s -m- fixed cable receptacle w/ mech. clamp dead front pin (line side) rig -17p -m- fixed cable receptacle w/ mech. clamp socket contact (load side) rig -17s -m- panel mount receptacle (bus bar) dead front pin (line side) rig- 17pr- panel mount receptacle (bus bar) socket contact (load side) rig- 17sr- panel mount receptacle (direct cable entry) dead front pin (line side) rig- 17pn- panel mount receptacle (direct cable entry) socket contact (load side) rig- 17sn- select cable size: (4=444 kcmil, 5=535 mcm, 6 = 646 mcm, 7=777 mcm) select grommet number from chart below * for basketweave grip substitute k for m use crimp tool: anderson (square d) versa crimp # vc8 color code options current type dc ac standard color code blue o range yellow brown red white black green part no. suffix -bl -or -y -br -r -w -bk -g single pole power connectors 900 1135 444 -777 kcmil rig-power grommet selection guide cable diameter 1. 000-1.125 1.125-1.250 1.250-1.375 1.375-1.500 1.500-1.625 1.625-1.750 1.750-1.875 code no.(xx) 18 20 22 24 26 28 30 72 panel mount receptacle rig-17x note: see page 19, shell size c24 for full mounting dimensions.
amphenol industrial p-500 ? / pd-501 power connectors type of boot part # ampacity wire size termination g ender part number ( see color code) cable sealing range 900* ?????? stud socket p -500126-bs- ??????? ??????? 900* 535mcm solder pin pd-501-l tmpc-10- 1.125 - 1.500 900 535mcm crimp pin p-500126-p tmpc-10- 1.125 - 1.500 325 313mcm solder pin pd- 501-s tmpc-10- 1.125 - 1.500 note: connectors are rated at 1000 volts ac/dc when mounted on 5" centers. copper alloy, silver plated contacts for maximum conductivity. crimp tool required for p-500126-p is thomas & betts hex crimp using tool # 13642m & die #11747. * when used with 125 c-rated cable. tmpc ? connectors type of cable sealing gender termination current range part number wire size boot part no. range socket 7/8" stud/panel board 900-1135 amps tmpc- 41777-l- n/a n/a n/a socket 2 hole bus bar 900-1135 amps tmpc- 41777-24l n/a n/a n/a pin crimp 900 amps tpmc-40535-l 444 - 535 kcmil tmpc -10- 1.125 - 1.500 pin crimp 900-1135 amps tpmc-40777-l 646-777 kcmil tmpc -10- 1.125 - 1.500 note: tpmc connectors are rated at 1000 volts ac/dc when mounted on 5" centers. material is copper alloy, silver plated for maximum conductivity and corrosion resistance. recommended crimping tools are as follows: anderson versa crimp vc8 (four indent). 73
|
